Menu
Your Cart

Truss Clips|Girder Hangers

Truss Clip attaches girders, trusses and rafters to wall plates to provide wind restraint. They are used as allpurpose ties wherever one member crosses another.

Girder Truss Shoe is a joist hanger for supporting mono trusses and girder trusses from timber members. Long leg girder truss shoes are suitable for depths ranging from 100mm to 225mm and a 85mm bearing. They are especially designed for supporting trussed rafters. The hanger includes a base tag to avoid unnecessary rotation. 

Multi Truss Girder Hanger is a heavy duty girder to girder hanger, available in four different sizes. 



Truss Clips

The Truss Clips secure truss rafters to wall plates. The truss clip eliminates the potential damage skew nailing can cause to connector plates, rafters or wall plates by offering a positive fixing on two planes with an assured safe working load. Truss clips are made from galvanised steel EN 10346 DX51D Z275. .

   

Truss clips are designed to hold trusses in position along the plate. The trusses do not need birdsmouth joints, and the truss clips would prevent the roof from spreading.

Fixing Instructions

All holes should be nailed using 12 nos 30 x 3.75 square twist nails or equivalent.

Girder Truss Shoes

Girder truss shoes are used to fix single trusses to girders or to fix other truss to truss connections. Girder truss shoes are used to fix single trusses to girders or to fix other truss to truss connections. The bearing length is 85 mm. The truss shoe has side flanges of a size that suits the depth of the girder chord to which it is fixed. The girder truss shoe includes a base tag which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This base tag can easily be bent where necessary. The girder shoe offers substantial safe working load . They should always have a manufacturer's mark.

Specifications
  • Especially designed for supporting trussed rafters.
  • Bearing 85mm.
  • Tag on the base of the hanger helps avoid rotation and aids fast, accurate location. It can easily be bent if not required.
  • Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275.
  • Also available in Stainless Steel.
  • Tested by Ceram Research.

Fixing Instructions

It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.

Girder Hangers

The Girder Hangers are designed to support a secondary girder off the main girder to ensure that the loads are transferred efficiently. The shoe is usually fixed to the main girder by means of bolts with washers under the bolt heads and nuts. The bearing length for these shoes is approx. 120 mm.  Offers safe working load of 29kN. 


           

Specifications
  • Especially designed for supporting secondary trusses and rafters.
  • 3mm thick.
  • Safe Working Load 27kN,
  • Holed for M20 bolts.
  • Galvanised after manufacturing,
  • Tested by BRE. 

Fixing Instructions

Use 3 no. M20 x 180 Bolts to fix girder shoes to the main girder. The secondary girder can be either bolted or nailed.

38mm Woody Truss Clip
Hot
Brand: TECO Model and Size: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
47mm Woody Truss Clip
Hot
Brand: TECO Model and Size: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
50mm Woody Truss Clip
Hot
Brand: TECO Model and Size: TCW50
Delivery Time: In stock, 1-2 days
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
Brand: TECO Model and Size: MGTS - 38x100
Delivery Time: In stock, 1-2 days
38mm x100mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Truss Sh..
Brand: TECO Model and Size: MGTS - 44x97
Delivery Time: In stock, 1-2 days
44mm x 97mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Tru..
Brand: TECO Model and Size: GTS - 50x300
Delivery Time: In stock, 1-2 days
50mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
Brand: TECO Model and Size: GTS - 38x300
Delivery Time: In stock, 1-2 days
38mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
Brand: TECO Model and Size: GTS - 63x300
Delivery Time: In stock, 1-2 days
63mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
Brand: TECO Model and Size: GTS - 76x300
Delivery Time: In stock, 1-2 days
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
Brand: TECO Model and Size: GTS - 100x300
Delivery Time: In stock, 1-2 days
100mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to f..
Brand: TECO Model and Size: GG - 80x550
Delivery Time: In stock, 1-2 days
80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respec..
Showing 1 to 11 of 11 (1 Pages)