Menu
Your Cart

Miscellaneous Items

 Gallows Brackets, Herringbone Struts, Cavity Closers and Hip Irons.

Gallows Brackets provide support for removal of internal chimney breast. Hip Irons prevent the lowest hip tile sliding off the roof particularly whilst the mortar is wet or if the mortar has failed due to hairline cracks. Herringbone Joist Struts provide the means to prevent sideways movement or the buckling of joists. Cavity closers are for eliminating damp and cold bridging around doors, windows and sills.

Gallows Brackets provide support for removal of internal chimney breast. Finished in Red Oxide Primer. Supplied in pairs. Use either lintel or angle iron between brackets. Made from galvanised, mild steel. Available in 375x375mm and 490x375mm.

   


Hip irons are made from 3mm-5mm thick galvanised steel, 25mm wide and 200mm-300mm long bent into the shape of a hook with a scrolled end. They are screwed to the top of the hip rafter at the eaves. The curled end should stand upright beyond the fascia board to line up with the eaves overhang of the roof tiles. Hip irons are traditionally used with mortar bedded Third Round, Plain Angle or Universal Angle Hip tiles. Their function is to prevent the lowest hip tile sliding off the roof particularly whilst the mortar is wet or if the mortar has failed due to hairline cracks. However, with the modern requirement that all hip tiles are mechanically fixed the use of hip irons can be more for aesthetic rather than structural reasons.

     


Herringbone Joist Struts provide the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel. Joint centres: 400mm-600mm, Strut length: 480mm-680mm. Meets bracing requirements for long span domestic floors. In the interest of safety all corners are rounded. Only three sizes are needed to suit all standard nominal joist centres. Only two fixings per end are required. Available sizes: 400mm, 450mm and 600mm.

      


Universal Closers are used for eliminating damp and cold bridging around doors, windows and sills. Provides an effective damp proofing and thermal barrier between frame, inner and outer wall leaf. Suitable for all frame and sill positions. Integrated and flexible water strip to reduce air leakage. Simple on-site trimming to cope with non-standard cavity widths.

 

200mm Hip Iron - 3mm thick
Guide Price
Brand: TECO Model and Size: HI200/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.  InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
Brand: TECO Model and Size: HI240/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.  InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
Brand: TECO Model and Size: HI300/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.  InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
Brand: TECO Model and Size: HI300/4
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.  InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
Brand: TECO Model and Size: HI300/5
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.  InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
Brand: TECO Model and Size: HI300P
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.  InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
375x375mm Gallows Bracket GB375 - pack of 2
Hot
Brand: TECO Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
Herringbone Joist Strut - 400mm centres
Hot
Brand: TECO Model and Size: HB400
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB400 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements fo..
Herringbone Joist Strut - 450mm centres
Hot
Brand: TECO Model and Size: HB450
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB450 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requiremen..
Herringbone Joist Strut - 600mm centres
Hot
Brand: TECO Model and Size: HB600
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB600 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requiremen..
Brand: TECO Model and Size: CCU
Delivery Time: In stock, 1-2 days
Universal Closers are used for eliminating damp and cold bridging around doors, windows and sills. This reduces installation time, and helps to achieve airtightness requirements. FeaturesTo close the cavity at external doors, window jambs and sills. To provide thermal insulation. To provide a d..
5mm Anker-it Yellow Plastic Plug - box of 100
New
Brand: TECO Model and Size: PY
Delivery Time: In stock, 1-2 days
5mm Anker-it Yellow Plug is a standard 5mm yellow coloured plastic plug for 5mm hole diameter and 22mm in length.  FeaturesAnchor hole size - 5mmPlug length - 22mmMin. anchor hole length - 30mmWood screw size = 2.5mm to 5mm ..
Showing 1 to 12 of 18 (2 Pages)